ZG2
Măsurare facilă a profilelor - Teach & Go (învăţare şi utilizare rapidă)
ZG2 permite măsurarea precisă a formei pentru suprafețe si materiale dificile. O interfaţă uşoară şi intuitivă cu utilizatorul permite instalarea, configurarea şi utilizarea eficientă. Un monitor LCD încorporat afişează rezultatele măsurătorii în timp real.
- Interfaţă uşor de utilizat - intuitivă pentru utilizator
- Monitor LCD pentru valoarea actuală încorporat - pentru configurare şi afişarea imediată a profilelor
- Multifuncţional - 18 instrumente de măsurare
- Precis - rezoluţie de 5 µm (3 mm/631 pixeli)
- Profiluri ample - până la 70 mm
Specificaţii şi informaţii pentru comenzi
Ordering information
Sensor heads
Note: - For details, refer the ratings and specifications table.
- Designate the cable length (0.5 m, 2 m) when ordering.
Sensor controllers
ZG2-WDC11A1 |
||
Accessories (order separately)
Real-time parallel output unit
RS-232C cable
Sensor head extension cable
Parallel mounting adaptor
Controller link unit
Memory card
Specifications
Sensor heads
Height direction1 |
||||||||
Linearity (in the height direction)2 |
||||||||
Temperature characteristic3 |
||||||||
5 mW max. output, 1 mW max. exposure (without using optical instruments) |
||||||||
Class 2M of EN60825-1 / IEC60825-1 |
Class 2 of EN60825-1 / IEC60825-1 |
|||||||
Beam shape (at measurement center distance)4 |
||||||||
STANDBY: Lights when laser irradiation preparation is complete (indication color: green) |
||||||||
LD_ON: Lights when the laser is irradiating (indication color: green) |
||||||||
Illumination on the photo-receiving face 7,000 lx max.: Incandescent lamp |
||||||||
Operating: 0 to 50°C, Storage: -15 to 60°C (with no icing or condensation) |
||||||||
10 to 150 Hz with 0.35 mm single amplitude for 80 min each in X, Y, and Z directions |
||||||||
150 m/s², 3 times each in 6 directions (up / down, right / left, forward / backward) |
||||||||
Case: Aluminum diecast, Front cover: Glass, Cable insulation: Heat-resistive polyvinyl chloride (PVC), |
||||||||
Laser labels (EN: 2 labels, FDA: 3 labels), Ferrite core (1), Instruction manual |
*1 Obtained by setting an Omron standard measurement object at the measurement center distance and determing the average height of the beam line. The conditions are given in the table below. However, satisfactory resolution cannot be attained in strong electromagnetic fields.The minimum resolution of the ZG2-WDS8T/WDS3VT is 0.25 ƒÊm, even when the average number of operations is increased. Resolution does not go any lower.
*2 The tolerance for an ideal straight line obtained by determing the average height of an Omron standard measurement object for the beam line. The CCD high-resolution mode is used. Linearity varies depending on the measurement object.
*3 A value attained by using an aluminum jig to secure the distance between the Sensor head and the measurement object. The CCD standard mode is used.
*4 Defined as 1/e 2 (13.5%) of the center light intensity. This may be influenced when light leakage also exists outside the defined area and the reflectivity of the light around the measurement object is higher than that of the measurement object.
Sensor controllers
Measurement cycle 2 |
16 ms (high-precision mode), 8 ms (standard mode), 5 ms (high-speed mode) |
|||
Select voltage or current (using the sliding switch on the bottom surface) |
||||
ON: Power supply voltage short or |
||||
Parall output3 |
||||
Height, 2-point Step, 3-point Step, Edge position, Edge width, Angle, Intersection coordinates, Intersection angle, Sectional area |
||||
Filter, Laser power adjustment, Position correction (height, position, lope), Linked operation, Point of inflection measurement |
||||
1,000 VAC, 50 / 60 Hz for 1 min between lead wires and Controller case |
||||
Operating: 0 to 50°C, Storage: -15 to 60°C (with no icing or condensation) |
||||
Vibration frequency: 10 to 150 Hz, single amplitude: 0.35 mm, acceleration: 50 m/s² |
||||
150 m/s², 3 times each in 6 directions (up/down, right/left, forward/backward) |
||||
Approx. 300 g (including cable) (Packed state: Approx. 450 g) |
||||
ZG2-WDC_1: Large Ferrite Core (1 piece), Instruction Manual ZG2-WDC_1A: Large Ferrite Core (1 piece), Small Ferrite Core (2 pieces), Instruction Manual, Setup Support Software (CD-ROM), USB cable (1 m) |
Data storage unit
24 |
||||
ON: Power supply voltage short or power supply voltage |
||||
No. of logged data5 |
Profiles saved: 5,120 profiles Measurement values saved: 65,000 values max.6 |
|||
Memory card (256 MB)7 |
Profiles saved: 35,328 profiles max. (256 profiles x 138 files) Measurement values saved: 7,150,000 values max. (65,000 values x 110 files) |
|||
External triggers, data triggers (self-triggers), and time triggers |
||||
Operating: 0 to 50°C, Storage: 0 to 60°C (with no icing or condensation) |
||||
2. The image input periods listed here are for fixed/auto sensitivity. The image input period will be longer for multi-sensitivity, high-speed multi-sensitivity, or other settings. When the high-power mode is ON, the shortest image input period is 95 ms regardless of the setting of the CCD mode. Use the eco monitor in the RUN mode to determine the actual image input period.
5. Data is saved in the memory of the main unit during logging. The data is automatically saved in a memory card after logging is completed. The maximum number of logging differs according to set conditions. For details, refer to the Users Manual.
2. The image input periods listed here are for fixed/auto sensitivity. The image input period will be longer for multi-sensitivity, high-speed multi-sensitivity, or other settings. When the high-power mode is ON, the shortest image input period is 95 ms regardless of the setting of the CCD mode. Use the eco monitor in the RUN mode to determine the actual image input period.
5. Data is saved in the memory of the main unit during logging. The data is automatically saved in a memory card after logging is completed. The maximum number of logging differs according to set conditions. For details, refer to the Users Manual.
Cum vă putem ajuta?
Dacă aveţi întrebări sau doriţi să cereţi o ofertă, contactaţi-ne sau trimiteţi-ne o solicitare.
Contactați-mă ZG2
Vă mulțumim pentru solicitarea trimisă. Vom reveni cu un răspuns cât mai curând posibil.
Întâmpinăm dificultăţi tehnice. . Formularul dumneavoastră nu a fost preluat cu succes. Vă rugăm să acceptaţi scuzele noastre şi să încercaţi încă odată mai târziu. Detalii: [details]
DownloadOfertă pentru ZG2
Prin completarea acestui formular puteţi face o cerere de ofertă. Vã rugãm completaţi toate câmpurile marcate cu *. Datele dumneavoastrã personale vor fi tratate cu confidențialitate.
Vă mulțumim pentru cererea de ofertă trimisă. Vă vom oferi informațiile cerute în cel mai scurt timp posibil.
Întâmpinăm dificultăţi tehnice. . Formularul dumneavoastră nu a fost preluat cu succes. Vă rugăm să acceptaţi scuzele noastre şi să încercaţi încă odată mai târziu. Detalii: [details]
DownloadCaracteristici
Width - Car body
Senzorul verifică lăţimea corectă între diferitele părţi ale corpului maşinii.
Bottom PCB board
Senzorul verifică deformarea unei plăci PCB, pentru a evita defectele de lipire sau conectare.
Area glue bead
Senzorul verifică zona (forma) adezivului, pentru a controla mişcarea continuă a robotului.
Position – Sheet
Senzorul verifică mişcarea hârtiei în timp, în vederea detectării deplasărilor.
Angle – Seat
Senzorul verifică diferenţele de unghi ale locaşului. Controlerul vă permite să calculaţi diferite unghiuri, prin definirea de sarcini suplimentare.