Seria D6FZ-FGS

Caracteristici

Identificaţi pierderile din conductele de aer comprimat

Măsuraţi scurgerile, consumul şi presiunea aerului, pentru a îmbunătăţi gestionarea energiei din conducta de aer. Senzorii de debit de aer din seria D6FZ-FGS1000 permit vizualizarea risipei invizibile de energie pentru sistemele de aer comprimat, pentru a îmbunătăţi acţiunile întreprinse de managerul energetic şi de companiile de servicii energetice (ESCo).

  • Măsurare a debitului cu precizie ridicată
  • Măsurare simultană a scurgerilor, consumului, presiunii şi temperaturii cu un singur produs
  • 2 ieşiri analogice şi 2 ieşiri în impulsuri
  • Comunicaţie RS485
  • Grad de protecţie ridicat: IP64
  • Se poate monta pe conducte sau pe racorduri curbate
  • Indicator de funcţionare
  • Valoare de prag (vârf/bază/scurgere)
  • Menţinere alarmă
Specificaţii şi informaţii pentru comenzi

Ordering information

Units

Appearance

Product name

Order code

 

Air flow sensor

(200L type)

D6FZ-FGT200

 

 

Air flow sensor

(500L type)

D6FZ-FGT500

 

Air flow sensor

(1000L type, cable length: 0.2 m)

D6FZ-FGS1000

 

Air flow station

(Cable length 1.5 m, including T-branch connector cable)

D6FZ-FGX21

 

Air flow sensor set (1000L type)

Air flow sensor (1000L type)

Air flow station

T-branch connector

Single-end wire cable (3 m)

D6FZ-FGS1000-S

Accessories (sold separately)

Appearance

Product name

Order code

 

T-branch connector

D6FZ-FC02

 

(Air flow sensor D6FZ-FGT only)

Mounting bracket

Mounting bracket: 1

Plus screw (M3): 4

D6FZ-FC03

 

 

(Air flow station D6FZ-FGX21 only)

Mounting magnet

Mounting magnet: 2

Plus screw (M3): 2

ZN9-EM01-S

 

Single-end wire cable

Cable length 3 m

M12 connector

(8 pin)

D6FZ-JD3A

Cable length 10 m

D6FZ-JD10A

Cable length 20 m

D6FZ-JD20A

 

Double-end connector cable

Cable length 3 m

M12 connector

(8 pin)

D6FZ-JD3B

Cable length 5 m

D6FZ-JD5B

Cable length 10 m

D6FZ-JD10B

Cable length 20 m

D6FZ-JD20B

Specifications

Air flow sensor

Item

 

Model

D6FZ-FGT200

D6FZ-FGT500

Applicable fluid

Air, nitrogen (N2)1

Working pressure

0.75 MPa (withstands pressure of 1.5MPa)

Measurement range2

0 to 200 L/min

0 to 500 L/min

Accuracy2

±2.0%F.S. at 50 L/min or more

±0.5%F.S. at less than 50 L/min

Pressure loss

2 kPa max.

4 kPa max.

Power supply voltage

12 to 24 VDC ±10% ripple (p-p) 10% max.

Current consumption

120 mA max.

Functions

Momentary flow/integrated flow/reversing display/zero point adjustment/peak and bottom hold/key lock/eco model/scaling (analog output)/judgement hysteresis/teaching

Output

Output interface

Analog

Current output 4 to 20 mA (1 contact), maximum load resistance 300 Ω max.

ON/OFF

Open collector output (2 outputs) 26.4 VDC 50 mA max.

ON residual voltage 2 V max.

(Outputs can be selected from judgement output, pulse output and unit error output)

RS-485

2-wire half duplex communication, start-stop synchronized method

Baud rate: 9.6k/19.2k/38.4k/115.2kbps, data bit length: 7/8bit,

stop bit length: 1/2bit, parity: none/even/odd,

termination resister (120 Ω ): ON/OFF,

communications protocol: compatible with CompoWay/F

Output values

Momentary flow, integrated flow, judgement output, unit error output

Connection bore diameter

Rc1/4 (8 A)

Rc1/2 (15 A)

Dimensions

30(W) × 77(D) × 63.7(H) mm

Weight (when packaged)

Approx. 400 g (500 g)

 

Item

 

Model

D6FZ-FGS1000

Applicable fluid

Air, nitrogen (N2)

Working pressure

0.99 MPa max.

Measurement

Flow

Detection range

1 to 1,000 L/min (std)

Resolution

0.1 L/min

Accuracy

±2.0% of reading at 50 L/min (std) or more

±0.1%F.S. at less than 50 L/min

Pressure

Detection range

0 to 0.99 MPa

Accuracy

±2%F.S.

Temperature

Detection range

-10 to 60°C

Accuracy

±1.5% (absolute temperature)

Pressure loss

Direct piping:10 kPa max. (0.5 MPa, at maximum flow)

Using coupler (TL type by NAGAHORI INDUSTRY CO., LTD.):

10 kPa max. (0.5 MPa, at maximum flow)

Power supply voltage

16 to 24 VDC ±10% ripple (p-p) 10% max. (Using single unit),

24 VDC ±10% ripple (p-p) 10% max. (Using multiple units)

Power consumption

2 W max.

Output

Output

interface

Analog

Current output 4 to 20 mA (2 contact)3 Max. load resistance 270 Ω max.

ON/OFF

Open drain output (2 outputs)4 24 VDC 50mA max.

ON residual voltage 1.5 V max., OFF leakage current 50 µA max.

RS-485

2-wire half duplex communication, start-stop synchronized method

Baud rate: 115.2 kbps (fixed), Data bit length: 8 bits (fixed), stop bit length: 1 bit (fixed), parity: even (fixed), communications protocol: compatible with CompoWay/F

Outpus values

Momentary standard flow, integrated standard flow, pressure, unit error output

Wiring connection

M12 connector (8-pin)

Connection bore diameter

Rc1 (25 A) bushing enables conversion to 15 A and 20 A

Dimensions

64(W) × 93(D) × 195(H) mm (excluding flange)

Weight (when packaged)

Approx. 1.2 kg (Approx. 1.7 kg)

 


1. Clean Dry Gas (must not contain large particle e.g. duct, oil and mist)

2. Converted value assuming the accumulated flow quantity following conditions
std (factory default): 20°C at 1 atmospheric pressure 101.3 kPa, nor: 0°C at 1 atmospheric pressure 101.3 kPa

3. Analog output comprise the momentary standard flow rate and pressure.

4. The integrated standard flow of the pulse output can be selected from 1, 10 (factory default), 100, or 1000 L(std)/P.

1. Clean Dry Gas (must not contain large particle e.g. duct, oil and mist)

2. Converted value assuming the accumulated flow quantity following conditions
std (factory default): 20°C at 1 atmospheric pressure 101.3 kPa, nor: 0°C at 1 atmospheric pressure 101.3 kPa

3. Analog output comprise the momentary standard flow rate and pressure.

4. The integrated standard flow of the pulse output can be selected from 1, 10 (factory default), 100, or 1000 L(std)/P.

Aveţi întrebări?

Suntem pregătiţi de ajutor.

Contactaţi-ne

Abonaţi-vă la actualizările de produs

Buletine informative despre inovaţii de produs, soluţii şi servicii, direct în inboxul dvs.

Vă mulțumim pentru abonarea la buletinul de știri Omron. Veți primi în curând un e-mail de la noi. Acest e-mail conține un link prin care activați abonarea la buletinul de știri pe e-mail. Această metodă este folosită din motive juridice și pentru a fi siguri că nimeni nu va folosi abuziv adresa dumneavoastră de e-mail.

Întâmpinăm dificultăţi tehnice. . Formularul dumneavoastră nu a fost preluat cu succes. Vă rugăm să acceptaţi scuzele noastre şi să încercaţi încă odată mai târziu. Detalii: [details]

Download

Documentaţie de produs

Descărcaţi fişe de date, manuale şi broşuri.

Căutaţi în centrul de descărcare

Cursuri de instruire

Beneficiaţi de instruire de la cei mai buni dintre inginerii noştri. De la începător la avansat.

Vizualizaţi cursuri de instruire